Short Cycling: What It Does to Your Air Conditioner and How to Prevent It

Have you noticed your air conditioner turning itself on and off constantly? Chances are your air conditioner may be short cycling, a common phenomenon that could cause your A/C unit to wear itself out long before its planned replacement. Read on to learn about the causes of short cycling and how to stop it, along with a few preventive tips you can use later on.

How Short Cycling Happens

Your air conditioner uses refrigerant to absorb latent heat found in indoor air and transport that heat outdoors. The compressor plays a major role in the air conditioning process by compressing and circulating the refrigerant through the condenser and other parts of the A/C system. This entire process, or “cooling cycle,” occurs while the compressor is turned on.

On a moderately hot day, most air conditioning systems will undergo three cooling cycles per hour, with each cycle lasting approximately 10 minutes. This means the compressor will run for 10 minutes, stop for 10 minutes, and repeat the cycle two more times during a single hour.

Short cycling happens when the cooling cycle becomes much shorter than the usual 10 minutes, causing the compressor to turn on and off more often than usual. This excessive stopping and starting adds wear on the compressor while robbing your home of its cooling comfort.

What Causes Short Cycling

Short cycling problems can have a variety of causes behind them. Not having enough refrigerant in your air conditioner is a common cause of short cycling, and it can also contribute to a variety of other air conditioning issues such as ice buildup. A poorly placed thermostat can also be fooled into triggering the air conditioner at inopportune times, resulting in constant short cycling.

Short cycling is also the hallmark of an oversized air conditioning system. Oversized air conditioners can use their excess capacity to cool indoor spaces quickly, but at the cost of short cycling in order to maintain a specific temperature.

Last but not least is the low pressure control switch, which turns off the compressor when the amount of refrigerant in the air conditioning system falls below a specific point. As with any other component on your air conditioning system, old age can take its toll on this particular switch. If and when it fails, it can produce short cycling symptoms that impact the rest of your air conditioning system.

How to Stop and Prevent Short Cycling

Fortunately, there are plenty of ways you can put an end to your air conditioner’s short cycling issues:

  • Check your air filter. Believe it or not, a clogged air filter can cause a wide variety of air conditioning issues. It’s a good idea to check your air filter and change it if it’s caked with dust and
    debris.
  • Check your thermostat placement. Have your thermostat installed in a central location on an inside wall of your home. Make sure your thermostat isn’t too close to the return air register so it doesn’t get confused by the influx of cool air and produce the wrong readings.
  • Check your air conditioner’s refrigerant levels. It’s a good idea to have a trained professional check the levels and, if necessary, add more refrigerant. Your HVAC professional will also track down any leaks within the air conditioning system.
  • Replace the low pressure control switch. If you are still dealing with short cycling issues after checking the above, you should have your HVAC professional replace this component with a brandnew one.
  • Check the compressor. A failing compressor may also exhibit short cycling symptoms, so it’s a good idea to have your HVAC professional check and, if necessary, replace the compressor.

Regularly scheduled maintenance can help prevent most short cycling issues. If your short cycling problems are due to an oversized air conditioner, you should consider having it replaced with one that’s properly matched to your home’s specific air conditioning needs.

Don’t forget that the experts at HELP Plumbing, Heating, Cooling and Electric can help you tackle your short cycling problems. Contact us whenever you have any HVAC maintenance issues that require help from a seasoned professional.